Load The Set Value - Toho Electronics TRM20A Operation Manual

8.5

Load the set value

［Explanation］
The set value preserved in the past is read from the SD card.
When selecting Param load key with the SD card has not been inserted in the recorder, the error
※
message is displayed. Please select again after inserting the SD card in the recorder.
Note: When the recorder is in recording, the set value cannot be loaded.
［Operation］
Select the SD/Param key ⇒ Param load key on the System.
File group
①
The set value file saved before is displayed by the list.
Files can be displayed up to 100 at a time. Please switch the page by Back and Next key, when
there is a file any more.
The file is selected touching, and a set value is read with the OK key. (The selected item is
displayed in aqua.)
Only the setting data that exists in "Prm" folder of the SD card can be read.
※
(Refer to Section 10.17 for "Prm" folder.)
8-5
①File group