Setting The Di Function - Toho Electronics TRM20A Operation Manual

7.24 Setting the DI function

［Explanation］
DI function is set.
Note: When the recorder is in recording, the setting cannot be changed.
［Operation］
Select the Others key
DI No.
①
The set DI No. is selected.
DI function
②
The DI function is set.
OFF
Record ON/OFF ：The record begins at DI ON, and the record is stopped at DI OFF.
LCD ON/OFF
U1／U2
"U1" and "U2" can be set up with the calculating formula of a Parameter Loader.
※
(Refer to Section 2.3 of "PARAMETER LOADER INSTRUCTION MANUAL" for
calculating formula.)
The DI function can set one item only to one "DI No.". The function of DI No. set ahead
※
automatically becomes "OFF", when you set the same DI function as two or more DI No.
DI key on the Parameter.
⇒
：The DI function is not used.
：When DI is ON, Regardless of "Sleep time", "LCD ON" is always used.
When DI is OFF, LCD is turned OFF in accordance with setting out of
"sleep time".
Even if it turned OFF DI, LCD is not immediately come by OFF.
※
(Refer to Section 8.16 for "Sleep time".)
：When there is an operation channel by which "U1" and "U2" are set as the
timer type, and when the input of DI is set to "ON", timer operation is
executed.
7-35
①DI No.
②DI function