•DI input:
Dry contact input (9 points), Common terminal is shared.
Ratings:Photo-coupler drive 12V DC about 3mA/1 point
The following control is possible according to the contact input.(ON/OFF pulse time
over 0.5 sec)
Start/stop of main and sub record operation
①
Message setting
②
Multiplication value reset
③
LCD backlight ON/OFF control
④
•DO output :
Open collector output (12 points), Common terminal is shared.
Point of contact ratings:30V DC 20mA/1 point
It is possible to specify it for an alarm output. It can be specified as special internal relay output.
10-8
Need help?
Do you have a question about the TRM20A and is the answer not in the manual?