Recording Operation At Power Failure - Toho Electronics TRM20A Operation Manual

5.4 Recording operation at power failure

If the power is turned off during recording, recording will start again the next time the power returns.
The recording operation at power failure shown below.
Example：When power is turned off two times from the start of recording to the end of recording
(Recording cycle：1sec,File recording cycle：1 hour)
Three recorded data will be created. (Recording start to Power-off, Power returns to Power-off,
Power returns to Recording stop)
Recording start （2017/01/01 00：00：00～）
Recording stop
The recording folder named "20170101000000"
(folder name: recording start time) will be created the
next time the power returns.
Power off
Power returns （2017/01/01 08：00：00～）
The recording folder named "20170101080000" (folder
name: recording start time) will be created the next
time the power returns.
Power-off
Power returns （2017/01/01 10：00：00～）
The recording folder named "20170101100000" (folder
name: recording start time) will be created the next time
recording is stopped.
5-2