Copy The Channel Setting - Toho Electronics TRM20A Operation Manual

7.12 Copy the channel setting

［Explanation］
The setting value of each channel is copied onto another channel.
Note: When the recorder is in recording, cannot be copy of channel.
［Operation］
Select the Input CH key
Channel No.
①
The channel that becomes the copy source of setting value is selected touching. (The selected
item is displayed in red.)
The copy destination can be selected by selecting the copy source. (Plurals can be selected. The
selected item is displayed in luminous color.
(The selection range becomes CH13
Back, OK, Cancel key
②
The copy of the setting is executed with OK key. Please select the Back key when you want to do
the selection at the copy destination try again. (If the channel at a "Copy source" and "Copy
destinations" is not selected, Back, OK key cannot be selected.)
Moreover, it returns to the parameter setting screen without changing the setting with the Cancel
key.
Copy key on the Parameter.
⇒
)
CH48 in the "Calc. CH.".)
～
7-21
①Channel No.
②Back, OK, Cancel key