Setting The Message - Toho Electronics TRM20A Operation Manual

7.23 Setting the message

［Explanation］
When "alarm is occurred and cleared" or "DI ON/OFF", the message is displayed.
Note: When the recorder is in recording, the setting cannot be changed.
［Operation］
Select the Others key
Message No.
①
The set message No. is selected.
Message
②
The message to display is set. (Up to 16 characters can be registered.)
Please input an arbitrary message from the character input screen, and set it with the OK key.
Timing
③
Timing in which the message is displayed is set.
Func key
Alarm occurred ：The message displays when alarm is occurred.
Alarm cleared
DI ON
DI OFF
The set message is displayed in the "Event log". (Refer to Section 6.6 for "Event log".)
Moreover, when the message is displayed with the FUNC button, it is necessary to set
Device/Other key⇒ FUNC key key of System to "Message". (Refer to Section 8.18 for
FUNC key key.)
Message key on the Parameter.
⇒
：The message displays when the FUNC button is pushed.
：The message displays when alarm is released.
：The message displays when the DI input is turned on.
：The message displays when the DI input is turned off.
7-34
①Message No.
②Message
③Timing