Device / Other" List - Toho Electronics TRM20A Operation Manual

[ModbusMas.] * Enabled only when the Master (General) is set for the master/slave setting.
Items
Communication
Select the ID for connection.
ID
Slave ID Set the slave ID for ModbusRTU.
Relative Address Set the communication address of a slave device.
Data format Select how the acquired data is handled.
Register type Select the Modbus register type.
Decimal point
Select the decimal point position of the data acquired.
position
Number of data Set the number of data to be acquired from the starting address.
[Remote AI] * Enabled only when the Master (Remote AI) is set for the master/slave setting.
Items
Remote ID Select the ID for connection.
ID ON/OFF Select whether the ID is used or not.
Station number Set the remote AI's station number.
Connection type Select the device to be connected.

8.29 "Device / Other" list

［Explanation］
Various settings concerning the others of system are done. Refer to Section 8.16
details.
［LCD］
Item
Input the value of sleep time.
Sleep time(min)
Input the value of LCD active brightness. It lightens by the numerical
Act. brightness
value large.
Input the value of LCD sleep brightness. It lightens by the numerical
Sleep brightness
value large.
If an alarm occurs at the time of LCD OFF, LCD is turned ON
Alarm Recovery
automatically.
［Clock］
Item
Current date Display the current date.
Setting date Input the value of setting date.
［FUNC key］
Item
Function Set the function key.
［File format］
Item
File format Select the file format.
Settings
Settings
Setting contents
Setting contents
Setting contents
Setting contents
8-36
Advanced
Advanced
8.23 for
～
Advanced
Advanced
Advanced
Advanced