List Of Security Logs - Toho Electronics TRM20A Operation Manual

10.20 List of Security Logs

No. Log
1 Power ON
2 Power OFF
3 Record start
4 Record stop
5 Login
6 Logout
7 fail: Login
8 Clear: Event log
9 Clear: Ethernet log
10 Add: Comment
11 Edit: Comment
12 Delete: Comment
13 Execute: mV Calibration
14 Execute: Volt Calibration
15 Execute: RTD Calibration
16 Execute: RJC Calibration
17 Set: Input CH-Input
18 Set: Input CH-Scaling
19 Set: Input CH-Display
20 Set: Input CH-Scale
21 Set: Input CH-Alarm value
22 Set: Input CH-Alarm action
23 Set: Input CH-REC/CALC
24 Execute: Input CH-Copy
25 Set: Calc. CH-F value
26 Set: Calc. CH-Timer
27 Set: Calc. CH-Display
28 Set: Calc. CH-Scale
29 Set: Calc. CH-Alarm value
30 Set: Calc. CH-Alarm action
31 Set: Calc. CH-REC/CALC
32 Execute: Calc. CH-Copy
33 Set: Display-Group name
34 Set: Display-Group CH
35 Set: Display-Graph display
36 Set: Display-Auto display
When logs are generated
When the power is turned on
When the power is turned off
When recording starts
When recording ends
When the user logs in
When the user logs out
When login fails
When the event history is cleared
When the transmission history is cleared
When a comment is added to the historical trend
When an existing comment is edited in the historical trend
When a comment is deleted from the historical trend
When mV is calibrated (setting not released to users)
When V is calibrated (setting not released to users)
When RTD is calibrated (setting not released to users)
When RJC is calibrated (setting not released to users)
When the OK key on the "Input" setting screen in the Input CH is
touched
When the OK key on the " Scaling " setting screen in the Input CH is
touched
When the OK key on the " Display " setting screen in the Input CH is
touched
When the OK key on the " Scale " setting screen in the Input CH is
touched
When the OK key on the " Alarm value " setting screen in the Input CH
is touched
When the OK key on the " Alarm action " setting screen in the Input CH
is touched
When the OK key on the " REC/CALC " setting screen in the Input CH is
touched
When "Copy" in the Input CH is executed
When the OK key on the " F value " setting screen in the Calc.CH is
touched
When the OK key on the " Timer " setting screen in the Calc.CH is
touched
When the OK key on the " Display " setting screen in the Calc.CH is
touched
When the OK key on the " Scale " setting screen in the Calc.CH is
touched
When the OK key on the " Alarm value " setting screen in the Calc.CH is
touched
When the OK key on the " Alarm action " setting screen in the Calc.CH
is touched
When the OK key on the " REC/CALC " setting screen in the Calc.CH is
touched
When "Copy" in the Calc.CH is executed
When the OK key on the " Group name " setting screen in the Display is
touched
When the OK key on the " Group CH " setting screen in the Display is
touched
When the OK key on the " Graph display " setting screen in the Display
is touched
When the OK key on the " Auto display " setting screen in the Display is
touched
10-17