Setting The Language - Toho Electronics TRM20A Operation Manual

8.22 Setting the language

［Explanation］
"Language format" and "Date format" of the recorder are set.
Note: When the recorder is in recording, the setting cannot be changed.
［Operation］
Select the Device/Other key ⇒ Language key ⇒on the System. Moreover, the Language key can
be selected directly from the MENU.
Language
①
The language format of recorder is set.
Japanese：The language setting is made Japanese.
English ：The language setting is made English.
Date format
②
The form of the date in the display of the time of the recorder is selected.
The display method in each item is as follows. (In this case, November 15, 2009)
YYYY/MM/DD：2009/11/15
DD/MM/YYYY：15/11/2009
DD-MMM-YY ：15-Nov-09
MMM-DD-YY ：Nov-15-09
Decimal symbol
③
(It supports since recorder version 1.20.)
The decimal symbol in a recorder is chosen.
Dot: Use a period for decimal point.
Comma: Use a comma for decimal point.
(Right figure)
(Regardless of setting of a decimal symbol, a
period is used for communication setting,
such as an IP address. Refer to Section 8.7 for
communication setting.)
[ Decimal symbol: Comma select]
③
8-27
①Language
②Date format
③Decimal symbol