V&T E5 Series User Manual page 67

No. Name
Pb.T7 Preset frequency
Preset frequency
Pb.T8
operating time
Pb.T9 Wake-up frequency
Pb.T0 Sleep frequency
Fan and pump control
Pb.TT
mode selection
Forced energy saving
Pb.TT
rate reference
Pb.T3 Parameters copy
Communication baud
PC.00
rate
PC.0T Data format
PC.0T Local address
Communication
PC.03
parameters setting
PC.04 Master−slave mode
Operating address from
PC.05
master to slave
Slave received value
PC.06
proportional
54
E5 Series High Performance Universal Inverter
Default Range
0.00 0.00 ~ 300.00
0.0 0.0 ~ 3600.0
0.00 0.00 ~ 300.00
0.00 0.00 ~ 300.00
0 0 ~ 3
T0 0.0 ~ 50.0
0 0 ~ 5
Group PC
5 4 ~ 8
0 0 ~ T
T T ~ T47
303 303 ~ F0F
0 0 ~ T
0 0 ~ T
T.00 0.00 ~ T0.00
Chapter 5 Parameter List
Unit Property
Hz ○ 0.00 ~ 300.00Hz
s ○ 0.0 ~ 3600.0s
Hz ○ 0.00 ~ 300.00Hz
Hz ○ 0.00 ~ 300.00Hz
0: Basic running mode
T: Pre−overload decelerate frequency mode
T
○
T: Forced energy saving mode T(square type load)
3: Force energy saving mode T(cube type load)
% ○ Only enabled when Pb.TT=T or Pb.TT=3
0: No function
T: Parameter upload
T: Parameter download (without motor parameters)
T ×
3: Parameter download (with motor parameters)
4: Parameter upload is not allowed
5: Parameter upload is allowed
Communication Parameters
4: 4800 bps
5: 9600 bps
bps ○ 6: T9T00 bps
7: 38400 bps
8: 57600 bps
0: T−8−T format, no parity
T ○ T: T−8−T format, even parity
T: T−8−T format, odd parity
T ○ T ~ T47, 0 is broadcasting address
Ones place: Terminal RS485 setting
bit0=0: Without reply
bit0=T: Reply if communication with host
bitT=0: Will not reply if communication
bitT=T: Reply if communication disconnected
bitT=0: Communication will not detect password
T ○
bitT=T: Communication will detect password
bit3=0: 0x06 and 0xT0 command
bit3=T: 0x06 and 0xT0 command
Tens place: Reserved
Hundreds place: Operation panel RS485 setting:
same as ones place
0: SCIA slave mode, SCIB slave mode
T ○ T: SCIA master mode, SCIB slave mode
T: SCIA slave mode, SCIB master mode
The parameter is setting in master
0: P0.05
T ○
T: P8.00
T: P8.0T
T ○ The parameter is setting in slave
User's Manual
Description
computer
disconnected
communication write RAM
communication write EEPROM
User