V&T E5 Series User Manual page 62

No. Name
Positive logic or
P7.09 negative logic selection
for gain and bias
YTTDO maximum output
P7.T0
pulse frequency
Output signal type
P7.TT
selection (YT T relay)
YT output function action
P7.TT
delay time
P7.T3 YT output pulse width
YT output function action
P7.T4
delay time
P7.T5 Reserved
Relay output function
P7.T6
action delay time
P7.T7 Relay output pulse width
Zero current detection
P7.T8
level
Running frequency
P7.T9
arrival detection level
P7.T0 FDTT level upper limit
P7.TT FDTT level lower limit
P7.TT FDTT level upper limit
P7.T3 FDTT level lower limit
P7.T4 Virtual terminal selection
Input and output
P7.T5 terminal active state
selection
E5 Series High Performance Universal Inverter
Default Range
0000 0 ~ TTTT
T0.0 0.T ~ 50.0
000 000 ~ T0T
0.0 0.0 ~ 999.9
0.0 0.0 ~ 999.9
0.0 0.0 ~ 999.9
0.0 0.0 ~ 999.9
0.0 0.0 ~ 999.9
0.0 0.0 ~ 999.9
0.0 0.0 ~ 50.0
T.50 0.00 ~ 300.00
50.00 0.00 ~ 300.00
49.00 0.00 ~ 300.00
T5.00 0.00 ~ 300.00
T4.00 0.00 ~ 300.00
000 000 ~ T0T
0000 000 ~ TT3T
Chapter 5 Parameter List
User's Manual
Unit Property
Ones place: AOT gain:
0: Positive
Tens place: AOT bias:
0: Positive
T
○
Hundreds place: AOT gain:
0: Positive
Thousands place: AOT bias:
0: Positive
kHz ○ 0.T ~ 50.0kHz
Ones place: YT output signal type
0: Level
T × Tens place: Reserved
Hundreds place: Relay output signal type
0: Level
s ○
s ○
s ○
s ○
s ○
s ○
% ○ 0.0 ~ 50.0%
Hz ○ 0.00 ~ 300.00Hz
Hz ○ 0.00 ~ 300.00Hz
Hz ○ 0.00 ~ 300.00Hz
Hz ○ 0.00 ~ 300.00Hz
Hz ○ 0.00 ~ 300.00Hz
Ones place: Multi function input terminal Xi:
0: Real terminal is enabled
T: Virtual terminal is enabled
T ○
Tens place: Reserved
Hundreds place: YTTYTTRelay terminal:
0: Real terminal is enabled
T: Virtual terminal is enabled
Ones place: Multi function input terminal Xi:
0: Xi is active if current flowing through Xi
T: Xi is active if no current flowing through Xi
Tens place: Multi function output terminal Yi:
0: YT is active if current flowing through YT
YT is active if current flowing through YT
T: YT is active if no current flowing through YT
YT is active if current flowing through YT
T ○
T: YT is active if current flowing through YT
YT is active if no current flowing through YT
3: YT is active if no current flowing through YT
YT is active if no current flowing through YT
Hundreds place: Relay terminal:
0: Relay is active if in magnetizing status
T: Relay is active if not in magnetizing status
Thousands place: Reserved
Description
T: Negative
T: Negative
T: Negative
T: Negative
T: Pulse
T: Pulse
User
49