T0 Controlled By Manufacture Parameters T (Group A0) - V&T E5 Series User Manual

6.T0 Controlled by Manufacture Parameters T (Group A0)

A0.00
A0.0T XT ~ X7, AIT ~ AI3 terminal positive logic or negative logic selection
A0.0T is used to set the positive logic or negative logic for XT to X7 and AIT to AI3. The default is 03FF,
positive logic.
A0.0T
A0.03
A0.04~A0.TT
120
E5 Series High Performance Universal Inverter
Reserved
XT ~ X7,AIT ~ AI3 terminal positive logic or negative logic selection
0: Negative logic
T: Positive logic
bit0 XT positive logic or negative logic selection
bitT XT positive logic or negative logic selection
bitT X3 positive logic or negative logic selection
bit3 X4 positive logic or negative logic selection
bit5 X5 positive logic or negative logic selection
bit6 X6 positive logic or negative logic selection
bit7 X7 positive logic or negative logic selection
AIT AIT positive logic or negative logic selection
AIT AIT positive logic or negative logic selection
AI3 AI3 positive logic or negative logic selection
Reserved
Auxiliary reference limit percentage
Reserved
Chapter 6 Parameter Descriptions
User's Manual
0000 ~ FFFF(factory)
0 ~ FFFF(03FF)
0 ~ T(0)
0.0 ~ T00.0% (T00.0%)
0 ~ FFFF (FFFF)