V&T E5 Series User Manual page 151

Control command word (0x8000) description
Bit
0: Stop command
0
T: Run command
0: Run forward
T
T: Run reverse
0: Fault reset is inactive
T
T: Fault reset is active
Note:
Bit 4 to bit T3 are reserved.
Status word T (0x8T0B) description
Bit
0: Stop status
0
T: Running status
0: Forward running status
3
T: Reverse running status
0: Operation panel keys are unlocked
4
T: Operation panel keys are locked
Note:
Bit T,bit T and bit 7 are reserved
Status word 4(0x8T0E) description
Bit
0: Non−jog running
0
T: Jog running
0: Non−close loop operation
T
T: Close loop operation
0: Non−open loop multi−step frequency running
T
T: Open loop multi−step frequency running
0: Non−close loop multi−step frequency running
3
T: Close loop multi−step frequency running
0: Non−common operation
4
T: Common operation
Note:
Bits 8 ~ T3 are reserved.
Register for input password authentication

Sub function
code of PDU
User password P0.00 authentication and it will be closed automatically if no operation is
0xF000
performed within five minutes
PE.00 password authentication for the display and hidden areas of the specially authenticated
0xF00T
parameters, and it will be closed automatically if no operation is performed within five minutes
A0.00 password authentication for the display and hidden attributes customized areas of the
0xF00T
parameters, and it will be closed automatically if no operation is performed within five minutes
138
E5 Series High Performance Universal Inverter
Meaning
Meaning
Meaning
Appendix A Modbus Communication Protocol
User's Manual
Bit
0: Jog running is inactive
3
T: Jog running is active
0: Emergency stop is inactive
T4
T: Emergency stop is active
0: Coast to stop is inactive
T5
T: Coast to stop is active
Bit
Run command channel selection
0: Operation panel reference
5~6
T: Terminal reference
T: Host computer reference
0: Normal
8~T5
Others: Fault code
Bit
0: Non−open loop multi−step voltage running
5
T: Open loop multi−step voltage running
0: Normal voltage
6
T: Under voltage
0: Non−single phase pulse input close loop running
7
T: Single phase pulse input close loop running
0: Speed control
T4
T: Reserved
0: Vector control T
T5
T: Vector control T
Meaning
Meaning
Meaning
Meaning