V&T E5 Series User Manual page 27

T.3.3 Removal and Mounting of Covers with Sheet−metal Enclosure:
E5−H−4TTTG, E5−H−4TT5G, E5−H−4TT8.5GA ~ E5−H−4T75GA
E5−A−4TT5 ~ E5−A−4T90
Removal of operation panel

Please refer to T.3.T Removal and Mounting of Operation Panel.
Removal cover

Remove the mounting screws on the lower part of the cover, lift the cover in direction T as shown in
FigureT−9, and then take out the cover in direction T.
Mounting cover

After connecting the cables of the main circuit terminals and control circuit terminals, cramp the
cover in direction T as shown in FigureT−T0, press down the cover in direction T and then tighten
the cover screws.
FigureT−9 Removal of cover
Mounting operation panel

Please refer to T.3.T Removal and Mounting of Operation Panel.

Note:
Do not directly mount the cover with operation panel; otherwise, the operation panel will have poor
contact.
14
E5 Series High Performance Universal Inverter
Chapter 2 Mechanical Installation
User's Manual
FigureT−T0 Mounting of cover