V&T E5 Series User Manual page 65

No. Name
Inverter or motor
PA.T3
overload pre-alarm
Overload pre−alarm
PA.T4
detection level
Overload pre−alarm
PA.T5
detection time
Faults shield and alarm
PA.T6
attribute setting T
Faults shield and alarm
PA.T7
attribute setting T
Faults shield and alarm
PA.T8
attribute setting 3
Faults shield and alarm
PA.T9
attribute setting 4
Fault locking function
PA.T0
selection
PA.TT Automatic reset times
PA.TT Automatic reset interval
Jump frequency T lower
Pb.00
limit
Jump frequency T upper
Pb.0T
limit
Jump frequency T lower
Pb.0T
limit
Jump frequency T upper
Pb.03
limit
Jump frequency 3 lower
Pb.04
limit
Jump frequency 3 upper
Pb.05
limit
52
E5 Series High Performance Universal Inverter
Default Range
000 000 ~ TTT
T30.0 T0.0 ~ T00.0
5.0 0.T ~ 60.0
00T0 0000 ~ TTTT
00T0 0000 ~ TTTT
T000 0000 ~ TTTT
000T 0000 ~ TTTT
0 0 ~ T
0 0 ~ T0
T.0 T.0 ~T0.0
Group Pb Enhanced Function Parameters
0.00 0.00 ~ 300.00
0.00 0.00 ~ 300.00
0.00 0.00 ~ 300.00
0.00 0.00 ~ 300.00
0.00 0.00 ~ 300.00
0.00 0.00 ~ 300.00
Chapter 5 Parameter List
User's Manual
Unit Property
Ones place: Detected mode selection:
0: Motor overload pre−alarm, relative to motor
rated current
T: Inverter overload pre−alarm, relative to
inverter rated current
T × Tens place: Action after overload pre−alarm:
0: Continue running
T: Report overload fault and stop
Hundreds place: Detecting condition selection
0: Detect all the time
T: Only detect at constant speed
% × T0.0 ~ T00.0%
s × 0.T ~ 60.0s
Ones place:
Tens place:
T ×
Hundreds place: Power supply is abnormal
Thousands place: Output phase loss
Ones place:
Tens place:
T ×
Hundreds place: Temperature sensor abnormal
Thousands place: Encoder disconnection
Ones place:
Tens place:
T ×
Hundreds place: Motor over temperature(PTC)
Thousands place: Communication fault T
Ones place:
Tens place:
T ×
Hundreds place: Reserve
Thousands place: Reserve
0: Fault is not locked
T ×
T: Fault is locked
T × 0 ~ T0
s × T.0 ~ T0.0s
Hz × UpperT lower frequency limit (P0.T3 ~ P0.T4)
Hz × UpperT lower frequency limit (P0.T3 ~ P0.T4)
Hz × UpperT lower frequency limit (P0.T3 ~ P0.T4)
Hz × UpperT lower frequency limit (P0.T3 ~ P0.T4)
Hz × UpperT lower frequency limit (P0.T3 ~ P0.T4)
Hz × UpperT lower frequency limit (P0.T3 ~ P0.T4)
Description
Motor or motor output cable is
short circuited to ground
Power supply is switched off
during running process
EEPROM fault
Pre-charging contactor fault
+T0V output error
Analog input error
(operation panel 485)
Communication fault T (terminal
485)
Software version incompatible
User