V&T E5 Series User Manual page 66

No. Name
UPTDN single step
Pb.06 frequency setting
without integral function
Magnification
accelerationT
Pb.07 deceleration time and
UPTDN change direction
selection
Operation panel ∧T∨
Pb.08 digital regulating
frequency control
Operation panel ∧T∨
Pb.09
integral rate
Terminal UPTDN digital
Pb.T0 regulating frequency
control
Terminal UPTDN integral
Pb.TT
rate
Reach pre-set running
Pb.TT
time action selection
Continuous running time
Pb.T3
setting
Accumulative running
Pb.T4
time setting
Pb.T5 Automatic restart
Automatic restart waiting
Pb.T6
time
E5 Series High Performance Universal Inverter
Default Range
0.T0 0.00 ~ T0.00
T000 0000 ~ TTTT
000T 0000 ~ TTTT
T.0 0.T ~ 50.0
000T 0000 ~ TTTT
T.0 0.T ~ 50.0
00 00 ~TT
0.0 0.0 ~ 6553.5
0.0 0.0 ~ 6553.5
0 0 ~ T
0.5 0.0 ~ T0.0
Chapter 5 Parameter List
User's Manual
Unit Property
Hz ○ 0.00 ~ T0.00Hz
Ones place: Acceleration T deceleration time:
0: XT
T: XT0
Tens place: Reserved
T ×
Hundreds place: Reserved
Thousands place: UPTDN change direction:
0: Change running direction is enabled
T: Change running direction is disabled
Ones place: Save operation panel ∧T∨ setting
frequency after power off
0: Save after power off
T: Clear after power off
Tens place: Save operation panel ∧T∨ setting
frequency after stop
0: Save after stop
T: Clear after receive a stop command
T ○
T: Clear in stop status
Hundreds place: Operation panel ∧T∨ enabled:
0: Only enabled when main reference is P0.05
T: Always enabled
T: Always disabled
Thousands place: Integral function selection
0: With integral function
T: Without integral function
s ○ 0.T ~ 50.0s
Ones place: Save terminal UPTDN setting
frequency after power off
0: Save after power off
T: Clear after power off
Tens place: Save terminal UPTDN setting
frequency after stop
0: Save after stop
T: Clear after receive a stop command
T ○
T: Clear in stop status
Hundreds place: Terminal UPTDN enabled:
0: Only enabled when main reference is P0.05
T: Always enabled
T: Always disabled
Thousands place: Integral function selection
0: With integral function
T: Without integral function
s ○ 0.T ~ 50.0s
Ones place: Reach continuous running time
0: Continue running
T: Stop and alarm
T ○
Tens place: Reach accumulative running time
0: Continue running
T: Stop and alarm
min ○ 0.0~6553.5
min ○ 0.0~6553.5
0: Disabled
T ×
T: Enabled
s ○ 0.0 ~ T0.0s
Description User
53