V&T E5 Series User Manual page 57

No. Name
Operation panel key−
PT.00 locking function
selection
Multi−function M key
PT.0T
function selection
Display parameter
PT.0T selection in running
status
Display parameter
PT.03
selection in stop status
Display parameter
PT.04 benchmark in running
status
Display parameter
PT.05 coefficient in running
status
Display parameter
PT.06
benchmark in stop status
Display parameter
PT.07
coefficient in stop status
44
E5 Series High Performance Universal Inverter
Default Range
Group P2
0 0 ~ 3
T 0 ~ 8
TCB0 0000 ~ FFFF
3TT0 0000 ~ FFFF
0 0 ~ F
0.0 0.0 ~ T000.0
0 0 ~ F
0.0 0.0 ~ T000.0
Chapter 5 Parameter List
Unit Property
Key and Display Parameters
0: No locking
T: Locking all keys
T ○ T: Locking all keys except MULTI key
3: Locking all keys except RUN and STOPTRST
keys
0: No function
T: Jog function
T: Emergency stop T (stop in shortest time)
3: Emergency stop T (coast to stop)
4: Switchover of run command channel
5: Switchover of parameter display mode (fastTall)
T ○
6: Switchover of parameter display mode
(non-factory settingTall)
7: Switchover of parameter display mode
(last changed T0 parametersTall)
8: Switchover of parameter display mode
(P0.0T menu mode )
Ones place:
0: Reference frequency (Hz)
T: Bus voltage (V)
T: AIT(V)
3: AIT(V)
4: AI3(V)
5: DI (%)
6: External terminal counting
7: Motor speed (rpm)
T ○
8: Close loop reference (%)
9: Close loop feedback (%)
A: Reserved (%)
B: Running frequency (Hz)
C: Output current (A)
D: Output torque (%)
E: Output power (kW)
F: Output voltage (V)
Tens, hundreds, thousands place: Same with above
Ones place:
0: Reference frequency (Hz)
T: Bus voltage (V)
T: AIT(V)
3: AIT(V)
4: AI3(V)
T ○ 5: DI (%)
6: External terminal counting
7: Motor rotation speed (rpm)
8: Close loop reference (%)
9: Close loop feedback (%)
A ~ F: Reserved
Tens, hundreds, thousands place: Same with above
T ○ 0 ~ F
% ○ 0 ~ T000.0%
T ○ 0 ~ F
% ○ 0 ~ T000.0%
User's Manual
Description User