Door Closer - Access 7000 Installation Manual

ASSEMBLY
Fig. 86 Assembling the door handles
• Make sure to fasten (screw) the handle properly so that the plastic cap at the outer ends sticks prop-
erly and evenly when placed.

5.11 DOOR CLOSER

• Assemble the door closer at the top of the door.
Fig. 87 Assembling the door closer
Note:
The door closer fits both left and right hung doors, the adjustment screws for
closing speed are to face the door hanging.
Fixing material and separate instructions are packed together with the door closer.
• Adjust the door closers link so that the angle between the door and the link is 90°.
• Adjust the door speed with adjustment screw 1.
• Adjust the door closing speed with adjustment screw 2.
For internal door closer, see chapter 6.5 INTERNAL DOOR CLOSER.
• Fasten label close to the pit prop on the end of the lower side panel (self adhesive)
90
7000 100 en-GB AD