Shaft View A And C - Access 7000 Installation Manual

ASSEMBLY
7
Fix the door to the architraves, use at least five
pcs screw drilling 6.3x22
8
Fix the door temporarily during installation with
a side cladding panel.
9
Temporarily fasten one side cladding panel.
Place the side cladding panel in level with the
bottom of the door. Hook the panel on the
screw in the guide rail.
10
Fold the side cladding panel into position and
fasten in the door with installation screws
4.2x14.
11
Tighten the second fixing in the floor landing.

5.7.4 SHAFT VIEW A AND C

• Assemble shaft profiles on the architraves. Assemble over, under and between doors on views A and
C.
64
Fig. 55 Fixation of the door to architraves
Fig. 56 Fix the door temporarily
Fig. 57 Side cladding panel fastening
7000 100 en-GB AD