Fixing-Points In The Building - Access 7000 Installation Manual

ASSEMBLY
• The electrical cabinet is usually mounted on the top floor.
• On the place where the electrical cabinet should be mounted there need to be inner beams at the
two rear beams next to each other (normally the inner beams are placed at every other rear beam)
At the lowest rear beams there are extra inner beams that can be moved up to the electrical cabinet
position. The inner beams are for mounting the bracket for the electrical cabinet.
• When the mounting bracket is in place the electrical cabinet can be mounted, suitably about 100
mm from the top (in cases where the electrical cabinet shall be mounted on top floor.)

5.2.3 FIXING-POINTS IN THE BUILDING

• Prepare the fixing points in the building before placing the mast in position. See Fig. 19 Fixing points
and 4 REACTION FORCES for calculations of how many fixings to use.
Fig. 19 Fixing points
For fixing-points with L-bracket see chapter 6.6 L-BRACKET.
42
7000 100 en-GB AD