ASSEMBLY
Fig. 82 Door play adjustment
5.10.6 DOOR COVER PLATES
Note:
Before assembling the door cover plates, check the door circuits function accord-
ing to the safety checklist
Fig. 83 Assembling door cover plates
• To assemble the door cover plates open the door and remove the middle screw.
• Slide the cover panel in position.
• Close the door and adjust the distance between the door and the cover plates. The distance is to be
about 4 mm.
Maximum distance between door and door frame is 6 mm.
• Tighten all screws after adjusting the distance.
88
7000 100 en-GB AD