Strapping The Flat Cable - Access 7000 Installation Manual

Fig. 32 Plastic container for oil
For automatic lubrication see chapter 6.8 AUTOMATIC LUBRICATION.

5.4.1 STRAPPING THE FLAT CABLE

The two flat cables, one wide and one narrow, connected to the moving platform need to be strapped
on a couple of places, see Fig. 33 Flat cable strappingbelow.
• First adjust the length of the cables with platform in lowest position.
• When the platform is in the highest position:
• Strap the two flat cables together with a plastic cable tie to one of the rear beams as in picture A, it
still need to be some free hanging cable below the fixed point.
• Strap the two flat cables together, as in picture B, on a position in the middle between the platform
and the lower fixed position A.
7000 100 en-GB AD
ASSEMBLY
51