Internal Door Closer; Half Size Door - Access 7000 Installation Manual

12
Adjust the open angle by rotating the curve.
Loosen the locking screw (pos 1) and adjust by
reducing the opening angle against minus (-) or
increasing against plus (+), see pos 2
• Adjust the closing speed in the high speed area H, with the adjustments screw pos 1/Fig. 129 External
door opener –half size door.
• Adjust the closing speed in the low speed area 1 with the adjustment screw pos 2/ Fig. 129 External
door opener –half size door.
• Remount the cover of the external door opener.
• Adjust the open time on the U1 control board with the dip switches. The default settings is 12 sec-
onds (off, on, off). The door open time can be adjusted between 6-60 seconds.

6.5 INTERNAL DOOR CLOSER

6.5.1 HALF SIZE DOOR

Note:
The internal door closer is already fixated on the half door.
Fig. 135 Assembly of internal door closer –Half size door
1
Remove the cover. It is attached with velcro
Fig. 134 Adjusting the opening angle –Right hanged
door
7000 100 en-GB AD
OPTIONS
117