Programming Different User Types; Exchanging Batteries - Access 7000 Installation Manual

• Make the connections between transmitter/receiver and door according to Fig. 166 Door connections
in reciever and make the connections between transmitter/receiver and platform according to Fig.
167 Platform connections in reviever.
• Mount the external call button with four screws, see Fig. 169 Mounting the external call button
Fig. 169 Mounting the external call button

6.12.3 PROGRAMMING DIFFERENT USER TYPES

To program the transmitter/receiver of the external call button, see separate instruction packed togeth-
er with the external call button and transmitter/receiver.

6.12.4 EXCHANGING BATTERIES

• When pushing the external call button the frame around it is indicating in red colour when the bat-
tery works, see picture below, Fig. 170 Battery indicator . When the LED does not lit up when pushing
it, exchange the battery
Fig. 170 Battery indicator
• Open the external call button by pressing the buttons on the top and bottom according to the picture
below, Fig. 171 Battery indicator
Fig. 171 Battery indicator
• Exchange the battery (Battery type: CR2032, 3 volt lithium) by removing the old according to position
1.
7000 100 en-GB AD
OPTIONS
135