Transport The Mast Into Position; Fitting Of Platform - Access 7000 Installation Manual

5.2.4 TRANSPORT THE MAST INTO POSITION

If the mast is delivered divided in parts, see instructions for split mast in Chapter 6.3 SPLIT MAST.
• Transport the mast in position in the shaft in front of the fixation. Make a coarse adjustment of the
mast, if necessary, use shims under the base of the mast until the guide rails corresponds to the fix-
ings in the building. According to See Fig. 20 Adjustments of the mast
Fig. 20 Adjustments of the mast
Adjustments of the mast, all distances in mm
Platform Shaft length
size
1040 1160
1280 1400
1480 1600
1580 1700
1980 2100
For L-bracket see chapter 6.6 L-BRACKET, split mast see chapter 6.3 SPLIT MAST.

5.3 FITTING OF PLATFORM

• Remove the transport screws from the lifting yoke. See Fig. 21 Lifting yoke screw
A. Mast center to building
595
715
815
865
1065
7000 100 en-GB AD
ASSEMBLY
B. Mast to building
120
240
340
390
590
43