Table of Contents
Advertisement
1
Adjust the closing speed in the high speed area
(H, see Fig. 128 Closing speed –External door
opener) with the adjustments screw pos 1.
2
Adjust the closing speed in the low speed area
(L) with the adjustment screw pos 2.
6.6 L-BRACKET
6.6.1 GENERAL
L-brackets are used as an alternative fixing method when the mast is standing by itself without fixing
points behind the mast. The purpose of the L-brackets is to be able to install the lift without fixings. The
construction is stabile first when the shaft is completed.
The L-bracket can be mounted on the A-side or the C-side depending on where the door is situated.
Fig. 139 L-bracket mounting alternatives
6.6.2 INSTALLATION
During installation with L-brackets, we recommend to not load the platform more than necessary, until
the shaft construction is completed.
• Fixate the L-bracket into the floor landing. See 4 REACTION FORCES.
Fig. 138 Adjust speed
7000 100 en-GB AD
OPTIONS
119
Advertisement
Table of Contents
