Table of Contents
Advertisement
3.
Installing and connecting the EzScan
3.1 Wall Mount Installation Instructions (Optional)
When wall mounting the scanner's base, be careful to respect measurements
indicated to drill holes for the wall mount.
It is recommended to use wall anchors and threaded screws with an 8mm
•
(5/16th inch) head diameter.
A 4-5mm (3/16th in) distance between wall and bottom screw head is
•
recommended.
Caution
possibility of the base falling and damaging the scanner.
IMPORTANT: Vatech is not responsible for accidents or damage
caused in the event the scanner falls.
:
If the docking base is not properly installed there is a
Page 13
Advertisement
Table of Contents
