Section 5 – Procedures
5.10-4 Check the Oil Level in the Axle
Gearbox
1. Remove the fill plug
2. Check the oil level. It should be even with the
bottom of the fill plug hole. Add oil if needed.
Refer to
2.12 Hydraulic & Gear
specifications.
229042ABA
268
from the gear box.
1
Oils. for oil
1
5.10-5 Change the Oil in the Axle Gearbox
1. Place a suitable container under the gearbox.
2. Remove the fill plug.
3. Remove the drain plug to allow oil to drain into
the container.
Fill/Check Port
4. Reinstall the drain plug.
NOTE
The gearbox is full when oil is leaking from the
check port.
5. Refill the gearbox with new oil as per
specifications. Refer to
Oils.
6. Reinstall the fill plug.
Axles
Drain Port
2.12 Hydraulic & Gear
SJ46 AJ+, SJ46 AJ, SJ51 AJ