Check The Oil Level In The Axle Gearbox; Change The Oil In The Axle Gearbox - Skyjack SJ63 AJ+ Service Manual

Section 5 – Procedures
5.10-4 Check the Oil Level in the Axle
Gearbox
1. Remove the fill plug
2. Check the oil level. It should be even with the
bottom of the fill plug hole. Add oil if needed.
Refer to 2.11 Hydraulic Specifications & Gear Oil
for oil specifications.
229043AAA
284
from the gear box.
1
1

5.10-5 Change the Oil in the Axle Gearbox

1. Place a suitable container under the gearbox.
2. Remove the fill plug.
3. Remove the drain plug to allow oil to drain into
the container.
Fill/Check Port
4. Reinstall the drain plug.
NOTE
The gearbox is full when oil is leaking from the
check port.
5. Refill the gearbox with new oil as per
specifications. Refer to
Specifications & Gear Oil.
6. Reinstall the fill plug.
Axles
Drain Port
2.11 Hydraulic
SJ63 AJ+, SJ63 AJ