How To Configure The Terminal - Intermec Trakker Antares 2400 User Manual

Chapter 2— Configuring the Terminals

How to Configure the Terminal

26
nugget
You can customize many operating characteristics of the Trakker Antares
2410 and 2415 terminals, such as the volume of their audio signals and
the bar code symbologies they decode. These characteristics are controlled
by configuration parameters. The values you set for the parameters
determine how the terminal operates. To learn about each configuration
parameter, see Chapter 6, "Configuration Command Reference," in the
Trakker Antares 2400 Family System Manual (P/N 071389).
You can configure the terminals by using any of the following methods.
Use the TRAKKER Antares 2400 Menu System
You can use the menus and screens of the TRAKKER Antares 2400 Menu
System to view the current configuration and change the configuration
parameters. For help, see "Configuring the Terminal With the Menu
System" on page 27.
Scan Bar Codes
You can change the terminal's configuration parameters by scanning Code
39 or Code 93 bar code labels that contain configuration commands. This
method is a fast, easy way to change the terminal's configuration. You can
scan the bar code labels in this manual and the 2400 Family system
manual, or you can create your own bar code labels. For help, see
Chapter 2, "Configuring and Managing the Terminals," in the 2400
Family system manual.
Send Commands Through the Serial Port
You can change the terminal's configuration parameters by sending
commands from a host computer or PC that is connected to the terminal's
serial port. For help, see Chapter 2, "Configuring and Managing the
Terminals," in the 2400 Family system manual.
Send Commands Through the RF Port (2415 Only)
You can change the terminal's configuration parameters by sending
commands through the UDP Plus or TCP/IP network. This method lets
you configure one or more terminals at the same time. For help, see
Chapter 2, "Configuring and Managing the Terminals," in the 2400
Family system manual.
Use the Clone Application
You can set the terminal's configuration parameters by using the clone
application to copy parameters from one 241X to another 241X. This
method is a fast, easy way to configure a new 241X with the same
parameters as an existing 241X. For help, see Chapter 2, "Configuring and
Managing the Terminals," in the 2400 Family system manual.
39 AGaramond
Trakker Antares 241X Handheld Terminal User's Manual
®