Problems And Solutions; Problems While Operating The Terminal - Intermec Trakker Antares 2400 User Manual

Chapter 4- Troubleshooting and Maintenance

Problems and Solutions

Problems While Operating the Terminal

Problems While Operating the Terminal

Problem
You press _ to turn on the terminal and
nothing happens.
58
nugget
If you have any problems using the 241X, look in this chapter to find a
possible solution. This chapter consists of the following sections:
Sections
Problems While Operating the Terminal
Problems While Configuring the Terminal
Problems While Configuring 802.1x Security
Problems With RF Connectivity (2415 only)
Problems While Running Applications
Problems Transmitting Data Through the Serial Port
Problems Transmitting Data Through the Intermec
Gateway or DCS 30X
Problems While Scanning Bar Codes
Booting and Resetting the Terminal
Cleaning the Scanner Window and Terminal Screen
You can also use the error numbers and messages table and the terminal
diagnostics to help analyze and solve problems. For help, see Chapter 4,
"Running Diagnostics," in the Trakker Antares 2400 Family System
Manual (P/N 071389).
If you have problems with the TE 2000 terminal emulation applications,
see the appropriate TE 2000 guide.
If you send the terminal in for service, it is your responsibility to save the
terminal data and configuration. Intermec is responsible only for ensuring
that the keypad and other hardware features match the original
configuration when repairing or replacing your terminal.
If you are operating the terminal and have trouble, check these possible
problems and solutions.
Solution
Make sure a charged battery pack is installed correctly on the 241X. For
help, see "Charging and Installing the Battery Pack" on page 8.
The battery pack may be discharged. Replace the battery pack with a
spare charged battery pack, or charge the battery pack and try again.
39 AGaramond
Trakker Antares 241X Handheld Terminal User's Manual
Page
58
60
64
66
68
69
69
70
71
74