Marking Check Boxes; Entering Ascii Control Characters - Intermec Trakker Antares 2400 User Manual

Marking Check Boxes

Entering ASCII Control Characters

Trakker Antares 241X Handheld Terminal User's Manual
39 AGaramond
nugget
To exit a screen
• To save the changes to the current configuration file, press = or > or
; to choose OK and press \. Or, press \ with the cursor in any field
except the Cancel button.
Or, to discard the changes, press = or > or ; to choose Cancel and
press \. Or, press % with the cursor in any field.
Screens may contain check boxes. Check boxes are used when you can
select more than one option at one time. To mark or clear check boxes,
press ( :.
READER COMMAND MENU
[Space] to enable or
disable a command
[X] Abort Program
[X] Backlight
[X] Backspace
[X] Change Config
[X] Clear
[X] Default Config
[X] Delete File
[X] Enter Accum
[X] Exit Accum
[X] List Files
_
more
Marking Check Boxes: For example, press = or > or ; to choose the Abort Program
check box and press ( : to clear the check box. The Abort Program reader command
is now disabled.
You can include ASCII control characters in a postamble or preamble by
using the TRAKKER Antares 2400 Menu System. For a definition of the
postamble or preamble, see Chapter 6, "Configuration Command
Reference," in the 2400 Family system manual.
You can configure the postamble or preamble to characters from the full or
extended ASCII character sets. For example, the Field Exit code (Ü) for
5250 terminal emulation is an extended ASCII character that is often
configured as the postamble.
To enter ASCII characters for a preamble or postamble
1 Decide which ASCII control character you want to set for the preamble
or postamble. Look up the control character in the "Full ASCII Table"
in Appendix B of the 2400 Family system manual and find the two-
digit hexadecimal number. For example, ETX in the Full ASCII Table
is the hexadecimal value 03.
Chapter 2— Configuring the Terminals
[X] Multi-Read
[X] Receive File
[X] Rename File
[X] Reset
[X] Run Program
[X] Scanner On
[X] Scanner Off
[X] Test & Service
[X] Transmit File
OK CANCEL
241XU038.eps
31