Unpacking The Terminal; Using The Terminal's Battery Pack - Intermec Trakker Antares 2400 User Manual

nugget

Unpacking the Terminal

Using the Terminal's Battery Pack

Trakker Antares 241X Handheld Terminal User's Manual
39 AGaramond
5 (Optional) Configure the serial port parameters. For more information,
see "Using Serial Communications on the Terminal" on page 44.
6 (2415 only) Configure the RF parameters. For more information, see
"Using RF Communications on the 2415" on page 48.
7 (2415 with 802.1x security only) Configure the 802.1x security
parameters. For help, see "Configuring the 802.1x Security Parameters"
on page 52.
8 Enable the bar code symbologies that you want to be able to scan. For
more information, see Chapter 6, "Configuration Command
Reference," in the 2400 Family system manual.
9 Exit the menu system and save your configuration changes to flash
memory. For help, see "Exiting the Menu System" on page 33.
When you are done with these steps, the default application or TE 2000
application that is loaded on your terminal will start. You are ready to use
the terminal.
When you remove the terminal from its box, save the box and shipping
material in case you need to ship or store the terminal. Check the contents
of the box against the invoice for completeness and contact your local
Intermec service representative if there is a problem.
The lithium-ion battery pack that is used in this device may present a
fire or chemical burn hazard if it is mistreated. Do not disassemble it,
heat it above 100ºC (212ºF) or incinerate it.
Attention Danger: Le paquet de piles d'ions de lithium qui est utilisé
dans cet appareil peut presenter un risque feu ou un risque chimique
de brûlure s'il est maltraité. Il ne faut pas le désassembler, le
réchauffer à une température plus élevée que 100 o C (212 o F) ou
l'incinérer.
The main power source for the terminal is a lithium-ion battery pack.
When you change the battery pack, a backup power source maintains the
terminal status, memory, and real-time clock for at least 15 minutes.
Follow these tips to get the best battery performance and life possible:
• Keep a spare, fully charged battery pack on hand.
• Keep a charged battery pack installed in the terminal to maximize the
backup power source's life and so you can continue to operate the
terminal without interruption.
Chapter 1— Learning About the Terminals
7