(Optional) Configure The Serial Port Parameters - Intermec Trakker Antares 2410 Quick Start Manual

C d 39 nuggetfont
5 Press \, and then press % twice to exit the TRAKKER
Antares 2400 Menu System. Choose OK to save your
changes.
If you are using the Wavelink Avalanche client management
system, you can quickly configure the parameters for your
terminal. For help, see Chapter 2, "Configuring and Managing
the Terminals" in the 2400 Family system manual.

(Optional) Configure the Serial Port Parameters

You can connect the terminal to a host computer, PC, or other
RS-232 device by using a special cable (P/N 069589). Or, you
can insert the terminal into the communications dock, and then
connect the dock to the RS-232 device.
The values you set for the terminal's serial port parameters must
match the values set for the host's (or other device's) serial port
parameters.
Press ( \ 2 4 8 to access the TRAKKER Antares 2400
Menu System. Choose Configuration Menu >
Communications Menu > Serial Port [COM1].
SERIAL PORT [COM1]
Protocol:
Configurable Configurable
Baud Rate: 19200
Parity: Even
Data Bits: 7
Stop Bits: 1
more
241XG001.eps
Serial Port [COM1] Menus
Trakker Antares 241X Handheld Terminal Quick Start Guide 11