Intermec Trakker Antares 2400 User Manual page 48

Chapter 2— Configuring the Terminals
34
nugget
Store configuration
changes in flash
memory?
(used when rebooting
the terminal)
Yes No
CANCEL
Note: You can also save the current configuration to flash memory by
choosing the Store Configuration command from the System Menu.
For help, see "Saving Configuration Changes in Flash Memory" in
Chapter 2 of the 2400 Family system manual.
4 Choose Yes and press \ to save your changes in RAM and update the
current configuration on the terminal. The Main Menu appears.
5 Choose Yes and press \ to save your changes to flash memory. The
terminal saves the current configuration as the active configuration. The
Exiting TRAKKER Antares 2400 Menu System screen appears.
Or, choose No and press \ to exit without saving. The terminal
continues to use your changes until you boot or reset the terminal. The
Exiting TRAKKER Antares 2400 Menu System screen appears.
Or, choose Cancel and press \ to return to the Main Menu.
Exiting
TRAKKER Antares 2400
Menu System
OK CANCEL
6 Choose OK and press \ to exit the TRAKKER Antares 2400 Menu
System.
Or, choose Cancel and press \ to return to the Main Menu.
After you exit the menu system, the terminal will resume the application
you were running when you started the menu system.
39 AGaramond
241XU051.eps
241XU042.eps
Trakker Antares 241X Handheld Terminal User's Manual