Exiting Screens And Saving Changes; Exiting The Menu System - Intermec Trakker Antares 2400 User Manual

Exiting Screens and Saving Changes

Exiting the Menu System

Trakker Antares 241X Handheld Terminal User's Manual
39 AGaramond
nugget
For help exiting the menu system, see the next two sections, "Exiting
Screens and Saving Changes" and "Exiting the Menu System."
When you exit a screen, you can save or discard your changes:
Exiting Screens and Saving Changes
Task
To exit a screen and save
the changes
To exit a screen and discard
the changes
1 Press % until you exit the TRAKKER Antares 2400 Menu System. If
you have made any changes to the current configuration, this screen
prompts you to save the configuration parameters that are currently
enabled on the terminal to RAM.
Save new
configuration
(in RAM)?
Yes No
CANCEL
2 Choose Yes and press \ to save your changes in RAM and update the
current configuration on the terminal. The Main Menu appears.
Or, choose No and press \ to exit without changing the configuration.
The Main Menu appears.
Or, choose Cancel and press \ to return to the previous menu or
screen.
3 From the Main Menu, press %. If you have made any changes, the next
screen prompts you to store the changes in flash memory.
Chapter 2— Configuring the Terminals
Description
Choose OK and press \. You can also press \ with
the cursor positioned anywhere except on the Cancel
button.
Choose Cancel and press \. You can also press \ with
the cursor in any field.
241XU053.eps
33