Intermec Trakker Antares 2400 User Manual page 46

Chapter 2— Configuring the Terminals
32
nugget
To enter an extended ASCII character, look up the character in the
"Trakker Antares Terminal Font Set" in Appendix C of the 2400
Family system manual and find the two-digit hexadecimal number. For
example, Ü (the 5250 Field Exit code) in the table has the hexadecimal
value 9A.
2 Use the TRAKKER Antares 2400 Menu System to configure a
preamble or postamble. Choose Main Menu > Configuration Menu >
Terminal Menu > Preamble/Postamble.
PREAMBLE / POSTAMBLE
Preamble:
abc
Postamble:
\x0D\x0A
OK CANCEL
3 Move the cursor to the field for the preamble or postamble.
4 Type the control character, extended ASCII character, or escape
character sequence in the preamble or postamble field.
• To type a control character or extended ASCII character in the
preamble or postamble field, use this syntax:
\xhh
where hh is the two-digit hexadecimal number for the control
character or the extended ASCII character. For example, to enter
ETX as a preamble, type:
\x03
To enter Ü (the 5250 TE Field Exit code) as the postamble, type:
\x9A
• To type an escape character (backslash) in the preamble or postamble
field, you must type two backslashes. The application ignores the first
backslash (\) character and saves the next characters. For example:
Enter These Preamble/Postamble
Characters Saved
\\ \
\\k \k
\ no data
5 Press \ or choose OK to save your changes and exit the screen.
39 AGaramond
241XU040.eps
Trakker Antares 241X Handheld Terminal User's Manual