Intermec Trakker Antares 2400 User Manual page 42

Chapter 2— Configuring the Terminals
28
nugget
To access the TRAKKER Antares 2400 Menu System
• Press ( \ 2 4 8 or scan this bar code:
TRAKKER Antares 2400 Menu System
*..-.*
*..-.*
The Main Menu appears, displaying four menu options.
MAIN MENU
Configuration Menu
Diagnostics Menu
System Menu
About TRAKKER 2400
_` Select item
[Enter] Next screen
[F1] Help
[Esc] Exit
Main Menu Options
Menu Description
Configuration Choose this menu to configure bar code symbologies, network
and communications parameters, serial port parameters, and the
terminal's operating characteristics. In the Symbologies Menu,
active symbologies are noted with an asterisk (*).
Diagnostics Choose this menu to run hardware, software, or system
diagnostics to help analyze and fix problems. You can also view
battery and system information. For help, see Chapter 4,
"Running Diagnostics," in the 2400 Family system manual.
System Choose this menu to manage files, load the default configuration,
set the time and date, store the terminal's configuration in flash
memory, and upgrade the firmware.
About Choose this option to see the part number, firmware version,
TRAKKER radio, and RF protocol (UDP Plus, WTP, or TCP/IP), and
2400 security (WEP, 802.1x TTLS, or 802.1x LEAP) that is loaded on
the terminal. You may need this information if you are working a
problem with an Intermec representative.
If you are using a DHCP server, this menu option also displays
the DHCP-assigned IP address.
39 AGaramond
241XU050.eps
Trakker Antares 241X Handheld Terminal User's Manual