Troubleshooting; System Error Messages - Endress+Hauser PROFIBUS Gammapilot M FMG60 Operating Instructions Manual

Troubleshooting

78
7 Troubleshooting
7.1

System error messages

7.1.1 Error signal
Errors occuring during commissioning or operation are signalled in the following way:
• Error symbol, error code and error description on the display and operating module
• PROFIBUS PA signal:
– MAX: +99999
7.1.2 Last error
The last error is displayed in the "diagnostics" (*A) function group in the "previous error"
(*A1) function. This display can be deleted in the "clear last error" (*A2) function.
7.1.3 Types of error
Type of error Symbol
Alarm (A)
continuous
Warning (W)
flashing
Alarm/Warning (E) You can define whether the error should behave as an alarm or as a warning.
Gammapilot M FMG 60 - PROFIBUS PA
Meaning
The output signal assumes a definite value:
• MAX: +99999
Additionally, an error message is displayed.
The device continues measurement. An error message is displayed
(alternating with the measured value).