Gammapilot M FMG 60 - PROFIBUS PA
4.10
Connecting the remote display and operation FHX40
The remote display and operating unit FHX40 is
available as accessory. It is connected to the
FHX40-connector of the Gammapilot M via the
supplied cable. To do this, the housing of the
Gammapilot M needs not to be opened.
For the Dust-Ex version of the Gammapilot M, the FHX40 connector is protected by a metal sleeve.
This sleeve must be detached before connecting the FHX40 and reattached afterwards. Tighten all
Allen screws securely.
Gammapilot M
L00-FMG60xxx-04-00-00-xx-007
L00-FMG60xxx-04-00-00-xx-008
Wiring
FHX40
27