Endress+Hauser PROFIBUS Gammapilot M FMG60 Operating Instructions Manual page 37

Gammapilot M FMG 60 - PROFIBUS PA
Directory structure
The files are organized in the following structure:
Gammapilot_M/PA/Profile3/Revision1.0/
• The GSD files in the directory "Extended" are needed for the network design software STEP 7 of
the S7-300/400 PLC family.
• The GSD files in the directory "Standard" are used for PLCs, which do not support an identifier
format but only an identifier byte (e.g. PLC5 of Allen-Bradley)
• For the network design tool COM ET200 with Siemens S5 instead of an GSD file the Type file
"EH_152Cx.200" and instead of the BMP files the DIB files have to be used.
Universal Database File
As an alternative to the device specific GSD file, the PNO provides an universal database file with
the designation PA139700.gsd for devices with one analogue input block. This file supports the
transmission of the main value. Transmission of a second cyclic value or a display value is not
supported.
When the universal database is used, the option "profile" must be selected in the "Ident
number" (*61) function.
BMP/
Eh1548_d.bmp
Eh1548_n.bmp
Eh1548_s.bmp
DIB/
Eh1548_d.dib
Eh1548_n.dib
Eh1548_s.dib
GSD/
Extended/Eh3x1548.gsd
Standard/Eh3_1548.gsd
Typdat5x/Eh31548x.200
Info/
Liesmich.pdf
Readme.pdf
Operation
L00-FMG60xxx-02-00-00-yy-002
37