General Information - GE MAC 1200 Operator's Manual

General Information

Revision C
Arrhythmia Mode Recording: General Information
In Arrhythmia mode, the MAC 1200/1200 ST continuously scans the
ECG for arrhythmias. From six simultaneously acquired leads, the MAC
1200/1200 ST automatically selects the two that provide the best signal
for analysis.
When the analysis algorithm detects an arrhythmia, the event is
recorded with "context" (see figure below). The length of the recording
varies with the duration of the event episode. In the setup menu
(Chapter 10, "Arrhythmia Mode"
for a recording.
The recorder starts each time it detects a single-beat event.
The recorder starts each time it detects an event different from the
previous event.
The recorder does not start at all.
127(
After starting the program, press
recording at 5 mm/s (c). If the unit identifies an arrhythmia event, it
will automatically switch to the faster paper speed. With the same
key , the trend recording can be stopped. The unit can be set up
to automatically start a trend recording when the Arrhythmia mode
is initiated.
MAC 1200/1200 ST
2012250-021
section) you determine the conditions
GE marquette
Event Recording
to select a continuous
031A
7-3