GE MAC 1200 Operator's Manual page 63

Revision C
Automatic Mode Recording: Recording
„
MAC 1200 with the MEMO (memory) option
ECGs are not automatically stored (configurable)
ECGs that were successfully transmitted to a host system are not
automatically removed from memory (configurable)
„
QTC is calculated with the Bazett formula (only MAC 1200 with option
MEAS (measurement) or DIAG (measurement + interpretation)).
The locations of all relevant device settings are shown below:
Operating mode Muscle filter
2
Report function
Failure message
1. if enabled
2. or REC OFF when the recording function is disabled
3. if any
The display shows three leads at a time. With
leads of the report sequence in groups of three.
„
The recording can be stopped with
„
For a description of the different reports, see
page 5-10.
MAC 1200/1200 ST
2012250-021
1 1
AC line filter Anti-drift system
Gain
Three leads
display here
3
.
"Report Formats"
1
"Patient Name"
Report sequence
Heart rate
you can display all
on
5-7