Ecg Transmission; General Considerations; Batch Transmission - GE MAC 1200 Operator's Manual

ECG Transmission

General Considerations

Batch Transmission

5-12
Automatic Mode Recording: ECG Transmission
127(
Observe the safety information given in Chapter 3,
Peripheral Equipment"
Resting ECGs acquired in Automatic mode can be transmitted to
CardioSys/CardioSoft or to a MUSE CV system. The units can either
communicate via modem or directly via a connection cable (see
Transmission" on page 5-16).
„
The status of transmission progress is indicated on the display with
message text, e.g., "Transmitting 1 of 1," or "Transmitting 2 of 6."
„
With the transmission can be stopped.
„
ECGs that were successfully transmitted are identified with the
letter S (for "Sent").
„
After the selected ECG records have been successfully transmitted, a
confirmation message displays, e.g. "6 of 6 ECG records successfully
transmitted."
„
All ECG records are time stamped (hours, minutes, and seconds). To
view a record's time stamp, highlight it. Then press
to scroll right to see the time stamp.
The MAC 1200/1200 ST unit can send all untransmitted records in a
batch transmission.
1. Activate the storage program by simultaneously pressing
. (Press the
2. Select Send All Unsent Records. Confirm your choice with
The message Initializing transmission is displayed, and the option to
cancel the transmission is provided.
MAC 1200/1200 ST
2012250-021
.
button first and hold it depressed.)
"Connecting
"Direct
+ . Use
and
.
Revision C