Stress Test Mode
Report Sequence
Protocol
Revision C
System Setup: Stress Test Mode
[STANDARD] (I, II, III, aVR, aVL, aVF, V1, V2, V3, V4, V5, V6)
CABRERA (aVL, I, -aVR, II, aVF, III, VI, V2, V3, V4, V5, V6)
SEQ. NO. 3 (Here, users can define a custom report sequence.)
Position the cursor on SEQ. NR 3.
Press
and create the report sequence as described in
Mode"
section.
The test protocols available for selection depend on the selected exercise
test device (see
"Communication"
The Protocol Editor allows you to change individual test parameters or to
create your own test protocols.
First select the protocol that you would like to edit or which is similar
to the one you want to create.
MAC 1200/1200 ST
2012250-021
section).
"Manual
10-13