Beep signal
1 x long
2 x short
3 x short
10.2.3 Warnings/error signals
Charging recept
acle
LED is flashing red
LED flashes 3x in the
colour of the current
charge level
LED alternately
flashes yellow/red
10.3 Axon
The term "Axon" stands for Adaptive eXchange Of Neuroplacement data. The Axon-Bus is an
Ottobock innovation for the field of exoprosthetics: a data transmission system, derived from
safety-related bus systems in the aviation and automobile industries. For the user this means
enhanced safety and reliability because of a considerably reduced sensitivity to electromagnetic
interference in comparison with conventional systems.
1 Avant-propos
INFORMATION
Date de la dernière mise à jour : 2020-12-14
Veuillez lire attentivement l'intégralité de ce document avant d'utiliser le produit ainsi que
►
respecter les consignes de sécurité.
Apprenez à l'utilisateur comment utiliser son produit en toute sécurité.
►
18
Additional display
-
LED on charging
receptacle lights up
briefly
-
Beeper
3x short
-
3x short
Event
•
Turn off prosthesis on charging receptacle
•
Charging begins (charging plug connected
to charging receptacle)
•
Charging ends (charging plug disconnected
from charging receptacle)
Switch on prosthesis
Battery voltage too low, prosthesis shuts off auto
matically
Explanation/rectification
Error in the Axon-Bus prosthesis solution
•
Turn the Axon-Bus prosthesis solution on/off
•
Check the plug connection in the socket
•
Connect the charger.
If the service icon (yellow wrench) or system
error icon (red icon) is displayed on the bat
tery charger, send the Axon-Bus prosthesis
solution to an Ottobock Service Center.
The connection from the product to the Axon
Master is interrupted
•
Check the connection (plug connection, flex
cable, Easy Plus, etc.)
Overheating of the Axon-Bus prosthesis
solution
•
Allow the Axon-Bus prosthesis solution to
cool down for a few minutes
•
Do not use the Axon-Bus prosthesis solution
at high ambient temperatures (Technical
data)
Français