Otto Bock AxonEnergy Integral 757B501 Instructions For Use Manual page 13

CAUTION
Changing prosthetic components when switched on
Injury due to faulty control or malfunction of the prosthetic components.
► Before changing prosthetic components (e.g. terminal device) switch the product off.
CAUTION
Overloading due to unusual activities
Injury due to unexpected product behaviour as a result of a malfunction.
The product was developed for everyday use and must not be used for unusual activities.
►
These unusual activities include, for example, sports with excessive strain and/or shocks to
the wrist joint (pushups, downhill mountain biking, ...) or extreme sports (free climbing,
paragliding, etc.).
Careful handling of the product and its components not only increases their service life but,
►
above all, ensures the patient's personal safety!
If the product and its components have been subjected to extreme loads (e.g. due to a fall,
►
etc.), then the product must be inspected for damage immediately. If necessary, forward the
product to an authorised Ottobock Service Centre.
CAUTION
Penetration of perspiration into the product
Injury and chemical burns due to leakage of battery fluids.
Wear protective clothing when removing or replacing the battery (disposable gloves and
►
protective goggles at a minimum).
Avoid direct skin contact!
►
CAUTION
Using the product with pointed or sharp objects
Destruction or damage to the product during installation.
Do not use any pointed or sharp objects when installing the product.
►
4.4 Patient information
WARNING
Operating the product near active implanted systems
Interference with active implantable systems (e.g., pacemaker, defibrillator, etc.) due to electro­
magnetic interference of the product.
When operating the product in the immediate vicinity of active implantable systems, ensure
►
that the minimum distances stipulated by the manufacturer of the implant are observed.
Make sure to observe any operating conditions and safety instructions stipulated by the man­
►
ufacturer of the implant.
CAUTION
Mechanical stress on the product
Injury due to faulty control or malfunction of the product components.
Do not subject the product to mechanical vibrations or impacts.
►
Check the product for visible damage before each use.
►
13