Display Of The Current Charge Level Using The Cockpit App; Cockpit App - Otto Bock Kenevo 3C60 Instructions For Use Manual

Beep signal
5x short
4x short
3x short
2x short
1x short
1x short

6.3.2 Display of the current charge level using the Cockpit app

Once the Cockpit app has been started, the current charge level is displayed in the bottom line of
the screen:

7 Cockpit app

Information on the Cockpit app
• The Cockpit app can be downloaded free of charge from the respective online store. For
more information, please visit the following website: https://www.ottobock.com/cockpitapp.
To download the Cockpit app, the QR code on the supplied Bluetooth PIN card can also be
read with the mobile device (requirement: QR code reader and camera).
• The language of the user interface in the Cockpit app can be changed using the adjustment
software.
• Depending on the version of the Cockpit app being used, the language of the user interface in
the Cockpit app corresponds to the language of the mobile device on which the Cockpit app
is being used.
• The serial number of the component to be connected has to be registered with Ottobock the
first time it is connected. If the registration is not accepted, use of the Cockpit app for this
component will be limited.
1) Turn the prosthesis 180° (the sole of the foot has to face up).
2) Hold still for 2 seconds and wait for beeps.
Vibration signal
3x long
5x long
1.
component
The patient can change the behaviour of the product to a certain extent with
the Cockpit app. In addition, information about the product (step counter,
charge level, etc.) can be retrieved. The adjustment software can be used to
trace the change at the patient's next appointment.
38% – Charge level of battery for currently connected
Battery charge level
more than 80%
65% to 80%
50% to 65%
35% to 50%
20% to 35%
less than 20%
65