Charging the battery
INFORMATION
No display after connecting the battery charger
If no symbols light up on the control panel after connecting the battery charger, the battery may be deep dis
charged. Leave the battery charger connected for at least 15 minutes and check the charge level while charging
by pressing the
button.
6.3 Display of the current charge level
6.3.1 Display of battery charge level without additional devices
The current charge level of the installed battery can be displayed by briefly pressing the
Sym
Battery charge level
bol
Charge level 67% to 100%
Charge level 34% to 67%
Charge level 10% to 34%
Charge level 5% to 10%
Charge level 1% to 5%
Battery empty
6.3.2 Display of the current charge level using the Cockpit app
Once the Cockpit app has been started, the current charge level is displayed in the bottom line of the screen:
6.3.3 Display of the current charge level using the adjustment app
Once the adjustment app has been started and connected to the component, the current charge level is displayed
in the bottom line of the screen:
6.3.4 Display of the current charge level during the charging process
After connecting the battery charger or pressing the
charge level is shown by an animated symbol on the control panel in addition to the display on the battery charger
(
,
,
).
Control
Battery charger
panel
The on time of the yellow LED
gets shorter as the charge level
increases. It only flashes briefly
at the end of the charging pro
cess.
22
1.
38% – Charge level of battery for currently connected component
98% – Charge level of battery for currently connected component
button while the battery charger is connected, the current
Battery is being charged, battery charge level is less than 34%
Battery is being charged, battery charge level is 34% to 50%
Battery is being charged, battery charge level is 50% to 67%
Battery is being charged, battery charge level is 67% to 99%
Battery is fully charged
button:
C-Brace joint unit 17KO1=*