Information On Proximity To Certain Areas - Otto Bock Kenevo 3C60 Instructions For Use Manual

NOTICE
Operating the power supply unit/charger outside of the permissible temperature range
Lack of proper charging functionality due to malfunction.
► Only use the power supply unit/charger for charging within the allowable temperature range.
The section "Technical data" contains information on the allowable temperature range (see
page 84).
NOTICE
Independent changes or modifications carried out to the battery charger
Lack of proper charging functionality due to malfunction.
Have any changes or modifications carried out only by Ottobock authorised, qualified per­
►
sonnel.
NOTICE
Contact of the battery charger with magnetic data storage devices
Wiping of the data storage device.
Do not place the battery charger on credit cards, diskettes, audio or video cassettes.
►
INFORMATION
Depending on the distance between the battery charger and the receiver on the knee joint, the
battery charger can warm up considerably during the charging process. This is not a malfunc­
tion.

4.6 Information on Proximity to Certain Areas

CAUTION
Insufficient distance to HF communication devices (e.g. mobile phones, Bluetooth
devices, WiFi devices)
Falling due to unexpected behaviour of the product caused by interference with internal data
communication.
Therefore, keeping a minimum distance of 30 cm to HF communication devices is recom­
►
mended.
CAUTION
Operating the product in very close proximity to other electronic devices
Falling due to unexpected behaviour of the product caused by interference with internal data
communication.
Do not operate the product in the immediate vicinity of other electronic devices.
►
Do not stack the product with other electronic devices during operation.
►
If simultaneous operation cannot be avoided, monitor the product and verify proper use in
►
the existing setup.
CAUTION
Proximity to sources of strong magnetic or electrical interference (e.g. theft prevention
systems, metal detectors)
Falling due to unexpected behaviour of the product caused by interference with internal data
communication.
58